论文标题
在不平衡的传输和分布系统上对三相和单相转换器的网格形成控制
Grid-forming control of three-phase and single-phase converters across unbalanced transmission and distribution systems
论文作者
论文摘要
在这项工作中,我们研究了包含连接到不平衡分布和传输网络的三相和单相转换器的动力系统的电网形成控制,调查了单相转换器之间的自动平衡,并提出了一种新颖的平衡反馈,以实现电网形成控制,以明确地允许在电压和电源中取消平衡。我们开发了一个准稳态的电源网络模型,该模型允许在传输,分布和标准变压器互连之间分析三相和单相功率转换器之间的相互作用。我们首先研究了该通用网络接受良好的KRON降低准稳态网络模型的条件。我们的主要贡献利用这种减少阶模型来开发分析条件,以通过标准变压器互连连接的网格形成三相和单相转换器,以使整个网络的稳定性稳定。具体而言,我们提供了网络拓扑的条件,(i)单相转换器自主自动同步将其自动化为相位平衡的工作点,以及(ii)通过与三相转换器同步的单相转换器相位平衡。此外,我们确定如果使用相位平衡反馈控制,则可以放松条件。最后,使用详细的传输系统(即IEEE 9-BUS)和分配系统(即IEEE 13-BUS)结合的案例研究来说明(i)(i)包含传输和分布连接转换器的电源系统的结果,以及(ii)使用电源连接器的电源系统在网格边缘的分配转换器独特地使用。
In this work, we investigate grid-forming control for power systems containing three-phase and single-phase converters connected to unbalanced distribution and transmission networks, investigate self-balancing between single-phase converters, and propose a novel balancing feedback for grid-forming control that explicitly allows to trade-off unbalances in voltage and power. We develop a quasi-steady-state power network model that allows to analyze the interactions between three-phase and single-phase power converters across transmission, distribution, and standard transformer interconnections. We first investigate conditions under which this general network admits a well-posed kron-reduced quasi-steady-state network model. Our main contribution leverages this reduced-order model to develop analytical conditions for stability of the overall network with grid-forming three-phase and single-phase converters connected through standard transformer interconnections. Specifically, we provide conditions on the network topology under which (i) single-phase converters autonomously self-synchronize to a phase-balanced operating point and (ii) single-phase converters phase-balance through synchronization with three-phase converters. Moreover, we establish that the conditions can be relaxed if a phase-balancing feedback control is used. Finally, case studies combining detailed models of transmission systems (i.e., IEEE 9-bus) and distribution systems (i.e., IEEE 13-bus) are used to illustrate the results for (i) a power system containing a mix of transmission and distribution connected converters and, (ii) a power system solely using distribution-connected converters at the grid edge.