论文标题
在有限的惯性下,poiseuille流动中可变形颗粒的悬浮液
Suspensions of deformable particles in Poiseuille flows at finite inertia
论文作者
论文摘要
我们分析了压力驱动流中可变形颗粒的悬浮液。悬浮液由中性浮力的最初球形颗粒和牛顿载体流体组成,并使用基于单胞纤维公式的完全欧拉方法通过直接数值模拟来求解流动。固相是用不可压缩的粘性高弹性组成型关系对固相建模的,并且该流程的特征是三个主要无量纲参数,即固体体积分数,雷诺和毛细管数。研究了有效粘度对这三个量的依赖性,以研究对可变形颗粒悬浮液的惯性影响。可以观察到悬浮液具有剪切的行为,并且在较密集的配置中强调了高剪切速率的有效粘度的降低。对雷诺和毛细血管数的单独分析表明,有效粘度更多地取决于毛细管,而不是雷诺数。此外,我们的模拟表现出可变形颗粒向剪切速率低的通道中心移动的一致趋势。这种现象特别是非常稀释的悬浮液,其中墙壁附近的整个区域没有颗粒。此外,由于较高的相互粒子相互作用,当体积分数增加时,该近壁区域逐渐占据。可变形性在此过程中也起着重要作用。确实,在高毛细血管数下,颗粒对剪切速率的变化更为敏感,并且可以更容易地修饰其形状,以适应通道中央区域中更多的颗粒。
We analyze a suspension of deformable particles in a pressure-driven flow. The suspension is composed of neutrally buoyant initially spherical particles and a Newtonian carrier fluid, and the flow is solved by means of direct numerical simulations, using a fully Eulerian method based on a one-continuum formulation. The solid phase is modeled with an incompressible viscous hyperelastic constitutive relation, and the flow is characterized by three main dimensionless parameters, namely the solid volume fraction, the Reynolds and capillary numbers. The dependency of the effective viscosity on these three quantities is investigated to study the inertial effects on a suspension of deformable particles. It can be observed that the suspension has a shear-thinning behavior, and the reduction in effective viscosity for high shear rates is emphasized in denser configurations. The separate analysis of the Reynolds and capillary numbers reveal that the effective viscosity depends more on the capillary than on the Reynolds number. In addition, our simulations exhibit a consistent tendency for deformable particles to move towards the center of the channel, where the shear rate is low. This phenomenon is particularly marked for very dilute suspensions, where a whole region near the wall is empty of particles. Furthermore, when the volume fraction is increased this near-wall region is gradually occupied, because of higher mutual particle interactions. Deformability also plays an important role in the process. Indeed, at high capillary numbers, particles are more sensitive to shear rate variations and can modify their shape more easily to accommodate a greater number of particles in the central region of the channel.